Emergency lighting key switch

Single pole 2-way secret key emergency light switch. Order online at Screwfix. Part of the MK Grid Plus system. Modules simply clip into place from the front of.

Free delivery on eligible orders of £or more. With a key switch on the other hand you are only cutting the power to your emergency lights without affecting your normal lighting.

So the test can be carried out during working hours (some safety critical areas might require a different routine!). FISH KEY FOR SECRET EMERGENCY LIGHT SWITCHES This is a key to fit all MK emergency and secret key switches. Flexible, key -operated 16AX rated switch. Assemble with other products into a modular front plate to create a grid perfect for your needs. For Emergency Lighting.

The Safety Centre can supply of selection of dedicated emergency lighting test keys. This range includes keys from some of the largest emergency lighting test switch. Hi, Thanks for the responses.

The ELTS manual key switch provides a simple low cost method of testing groups of Emergency Luminaires by interrupting the permanent mains supply by the insertion and. Simply push the key into the switch , this will interrupt the power supply. This automatic key operated emergency lighting test switch is permanently wired to the emergency luminaire supply. It can interrupt the supply for pre-programmed periods.

Make sure that in the event of an emergency , you have the right lighting to illuminate the exit path with our range of emergency lighting. This test switch allows the mains supply to be interrupted for a. Key Operated Test Switch. Discuss Emergency key switch wiring in the Electrical. That sai the method for wiring the test switch can vary depending u. Massive Savings On Schneider Electrics.

Overview of emergency light fittings and using a key operated switch to disconnect power for test purposes. Jitender Well-Known Member. Can someone confirm, whether this diagram is ok for wiring up a maintained emergency light s. Not from the switch manuafacturers (eg MK) nor from the lighting companies (eg Thorn) nor from.

The Emergency Lighting Test Keyswitch is suitable to securely isolate the mains supply to the emergency lights in order to activate the units for testing purposes. The double pole switch contact is operated by a key to ensure only authorised individuals will isolate the mains supply. The manual test key switches are a quick and simple way of interrupting the power supply to test emergency light fittings in both small and larger buildings.

Bear in mind that emergency lighting should operate on the failure of LOCAL primary lighting - not lighting in general, and not, strictly, lighting NOT in the local area. The Automatic Emergency Test Switch is designed to test the function of emergency luminaires. The key switch is used to interrupt the supply to the luminaires for a. Emergency lighting needs to be tested regularly to ensure it is working properly. It is designed to provide prompt, automatic lighting in an emergency situation when the main power supply is cut and the normal mains lighting fails.

The test switch is an outlet you can use to test them.