Wednesday, 5 September 2018

Luminaire fire hoods

We have a great selection to choose from that will cover most applications. Lighting holes in a ceiling is a potential fire hazard. Plaster board ceilings have a natural ability to act as a fire barrier. Thermal Luminaire Covers are fire rated covers designed to upgrade the fire resistance of recessed luminaire or fluorescent module fixtures and reinstate the.


Stops the passage of smoke and fire through a fire rated ceiling fitted with recessed downlights.

Fire hoods - information and advice. The thought is that if you cut a hole in the ceiling it provides a route for fire to enter the ceiling void and may lead to. If your LED spotlights are not fire rate I would recommend changing them to ones that are, as the cost of buying the fire hoods , disconnecting the wiring to run the cable through the hoo reconnection, fitting the hood and its frame properly before reinstalling the light, will probably cost a lot more.


Basic fire hoods for use with non fire rated downlights. Provide minute fire protection which is adequate for domestic use. The downlight cover can be easily installe from below or above the ceiling.


A range of fire hoods and intumescent insulation guards for use with recessed and semi-recessed downlights. Cutting a hole in a ceiling to install lighting affects.

This is suitable for MRB. Comes with internal rods and bulldog style clips. In a fire situation the cover expands internally to fill all the available space with a highly insulating fire resistant char. MRC,MR MRE Modular Fittings.


Thus, the fire is unable to penetrate the hole and the cover is able to give additional insulation protection to the ceiling void to reduce the chance of heat build up and ignition of flammable materials such as accumulated dust and insulation. Find great deals on eBay for light fire hoods. Installing a fire hood to your lighting can buy you precious time in the event of a fire. Failing to set up some sort of fire protection to your downlights can be costly, risking lives, goods and property. Tests have shown that without a canopy in place, fire and smoke penetrates through the recessed light fitting in seconds, speading to the void or room above and endangering both lives and property.


The fire hood is flexible and light and can be used in plasterboar concrete or suspended ceilings. Minute fire rated - NOT acoustically rated. Easy to install from below by folding up and pushing through the hole. Fire Hood for downlighter or spot lights.


Ideal for non- fire rated downlights wher fire protection is required. Luminaire smoke hoods are described by characteristics such as smoke hoods and blankets. An example use may be within a general lighting systems with prefabricated wiring.


Each ceiling is subject to fire regulations and where applicable the ceiling construction needs to be fire rated.

Thus from one simple to install luminaire the both regulations can be complied with, negating the need for separate fire hoods or a segregated ceiling void as requested by The Standard Robust Details. Protects against the passage of smoke and fire through a fire rated suspended ceiling with recessed luminaire lighting panels. They cover the downlights and in the event of a fire , they seal off the hole and slow down the fire from spreading onto adjoining ceilings.


Intuchem Fire Rated Luminaire Hoods are tested to halt the passage of smoke and fire through a fire rated suspended or modular ceiling, where recessed luminaire. Maintains ceiling fire rating with the installation of a downlight. Order online at Screwfix.


Grab A Bargain Direct From The Manufacturer.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts